[PATCH] arm64: dts: ti: k3-am62p-j722s: add rng node

[Kumar, Udit]

Hello Michael

Thanks for patch

On 3/13/2025 8:11 PM, Michael Walle wrote:
> Add the node for the random number generator inside the crypto module.
>
> Signed-off-by: Michael Walle <mwalle at kernel.org>
> ---
> This was tested on a J722S/AM67A. Also, according to the TRM this is the

Could you re-confirm please , after adding this node.  you selected trng 
offered by Linux


> MCU instance of the SA3UL. But it's defined in -main.dtsi. Is this
> correct?

Yes this is correct,

please refer

https://www.ti.com/lit/zip/sprujb3  SPRUJB3A.pdf

table 2.1 Main Memory map, this node falls under main domain

> ---
>   arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 6e3beb5c2e01..e868e006318e 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> @@ -227,9 +227,17 @@ crypto: crypto at 40900000 {
>   		reg = <0x00 0x40900000 0x00 0x1200>;
>   		#address-cells = <2>;
>   		#size-cells = <2>;
> +		ranges = <0x00 0x40900000 0x00 0x40900000 0x00 0x30000>;
> +
>   		dmas = <&main_pktdma 0xf501 0>, <&main_pktdma 0x7506 0>,
>   		       <&main_pktdma 0x7507 0>;
>   		dma-names = "tx", "rx1", "rx2";
> +
> +		rng: rng at 40910000 {
> +			compatible = "inside-secure,safexcel-eip76";
> +			reg = <0x00 0x40910000 0x0 0x7d>;
> +			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;

For completeness , this is ok to add this node but should be kept disabled

similar to

https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi#L662 




> +		};
>   	};
>   
>   	secure_proxy_sa3: mailbox at 43600000 {