[PATCH v3 7/8] arm64: dts: freescale: Add the BOE av101hdt-a10 variant of the Moduline Displayy

[Maud Spierings | GOcontroll]

Sent: Thursday, March 27, 2025 5:31 PM
To: Maud Spierings | GOcontroll <maudspierings at gocontroll.com>
 
> On Thu, Mar 27, 2025 at 04:52:42PM +0100, Maud Spierings via B4 Relay wrote:
>> From: Maud Spierings <maudspierings at gocontroll.com>
>>
>> Add the BOE av101hdt-a10 variant of the Moduline Display, this variant
>> comes with a 10.1 1280x720 display with a touchscreen (not working in
>> mainline).
>>
>> Signed-off-by: Maud Spierings <maudspierings at gocontroll.com>
>>
>> ---
>> Currently the backlight driver is not available, this will be upstreamed
>> in a future patch series. It is a Maxim max25014atg.
>>
>> The touchscreen has a Cypress CYAT81658-64AS48 controller which as far as
>> I know is not supported upstream, the driver we currently use for this is
>> a mess and I doubt we will be able to get it in an upstreamable state.
>> ---
>>  ...tx8p-ml81-moduline-display-106-av101hdt-a10.dts | 100 +++++++++++++++++++++
>>  1 file changed, 100 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dts
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..1917e22001a1815a6540f00cf039ff352801cda8
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dts
> 
> why not use dt overlay to handle difference dsplay module.
> 
> Frank

This may just be me not being very familiar with overlays, how they work
and when to use them. I guess the advantage is saving some spaces in not
having the base board dtsi copied in two dtbs on the target right?

I am still quite new to all of this, so any info on when to use what is
greatly appreciated.

>> @@ -0,0 +1,100 @@
>> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
>> +/*
>> + * Copyright 2025 GOcontroll B.V.
>> + * Author: Maud Spierings <maudspierings at gocontroll.com>
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "imx8mp-tx8p-ml81-moduline-display-106.dtsi"
>> +
>> +/ {
>> +     model = "GOcontroll Moduline Display with BOE av101hdt-a10 display";
>> +
>> +     panel {
>> +             compatible = "boe,av101hdt-a10";
>> +             pinctrl-names = "default";
>> +             pinctrl-0 = <&pinctrl_panel>;
>> +             enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
>> +             reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
>> +             power-supply = <&reg_3v3_per>;
>> +
>> +             port {
>> +                     panel_lvds_in: endpoint {
>> +                             remote-endpoint = <&ldb_lvds_ch0>;
>> +                     };
>> +             };
>> +     };
>> +
>> +     reg_vbus: regulator-vbus {
>> +             compatible = "regulator-fixed";
>> +             regulator-name = "usb-c-vbus";
>> +             regulator-min-microvolt = <5000000>;
>> +             regulator-max-microvolt = <5000000>;
>> +             power-supply = <&reg_6v4>;
>> +             regulator-always-on;
>> +     };
>> +};
>> +
>> +&lcdif2 {
>> +     status = "okay";
>> +};
>> +
>> +&usb3_1 {
>> +     status = "okay";
>> +};
>> +
>> +&usb3_phy1 {
>> +     status = "okay";
>> +};
>> +
>> +&usb_dwc3_1 {
>> +     dr_mode = "host";
>> +
>> +     port {
>> +             usb1_hs_ep: endpoint {
>> +                     remote-endpoint = <&high_speed_ep>;
>> +             };
>> +     };
>> +
>> +     connector {
>> +             compatible = "usb-c-connector";
>> +             pd-disable;
>> +             data-role = "host";
>> +             vbus-supply = <&reg_vbus>;
>> +
>> +             port {
>> +                     high_speed_ep: endpoint {
>> +                             remote-endpoint = <&usb1_hs_ep>;
>> +                     };
>> +             };
>> +     };
>> +};
>> +
>> +&lvds_bridge {
>> +     assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
>> +     <&clk IMX8MP_VIDEO_PLL1>;
> 
> fix indentation.

Just put it on one line as it fits within the 80 columns

>> +     assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
>> +     /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 2 * 7 */
>> +     assigned-clock-rates = <0>, <1054620000>;
>> +     status = "okay";
>> +
>> +     ports {
>> +             port at 1 {
>> +                     ldb_lvds_ch0: endpoint {
>> +                             remote-endpoint = <&panel_lvds_in>;
>> +                     };
>> +             };
>> +     };
>> +};
>> +
>> +&iomuxc {
>> +     pinctrl_panel: panelgrp {
>> +             fsl,pins = <
>> +                     MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 /* COM pin 157 */
>> +                     MX8MP_DSE_X1
>> +                     MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 /* COM pin 159 */
>> +                     MX8MP_DSE_X1
>> +             >;
>> +     };
>> +};
>>
>> --
>> 2.49.0
>>
>>

Kind Regards,
Maud