[PATCH v3 07/12] media: imx8mq-mipi-csi2: Add imx8mq_plat_data for different compatible strings

Laurent Pinchart laurent.pinchart at ideasonboard.com
Thu Mar 27 13:35:00 PDT 2025


On Mon, Feb 10, 2025 at 03:59:26PM -0500, Frank Li wrote:
> From: "Guoniu.zhou" <guoniu.zhou at nxp.com>
> 
> Introduce `imx8mq_plat_data` along with enable/disable callback operations
> to facilitate support for new chips. No functional changes.
> 
> Signed-off-by: Guoniu.zhou <guoniu.zhou at nxp.com>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> Change from v2 to v3
> - none
> change from v1 to v2
> - remove internal review tags
> ---
>  drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 60 ++++++++++++++++++++-------
>  1 file changed, 46 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> index 1f2657cf6e824..b5eae56d92f49 100644
> --- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> +++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> @@ -62,6 +62,8 @@
>  #define CSI2RX_CFG_VID_P_FIFO_SEND_LEVEL	0x188
>  #define CSI2RX_CFG_DISABLE_PAYLOAD_1		0x130
>  
> +struct csi_state;
> +
>  enum {
>  	ST_POWERED	= 1,
>  	ST_STREAMING	= 2,
> @@ -83,11 +85,11 @@ static const char * const imx8mq_mipi_csi_clk_id[CSI2_NUM_CLKS] = {
>  
>  #define CSI2_NUM_CLKS	ARRAY_SIZE(imx8mq_mipi_csi_clk_id)
>  
> -#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
> -#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
> -#define	GPR_CSI2_1_HSEL			BIT(10)
> -#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
> -#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3f) << 2)
> +struct imx8mq_plat_data {
> +	const char *name;

The name is not used, drop it.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>


> +	int (*enable)(struct csi_state *state, u32 hs_settle);
> +	void (*disable)(struct csi_state *state);
> +};
>  
>  /*
>   * The send level configures the number of entries that must accumulate in
> @@ -106,6 +108,7 @@ static const char * const imx8mq_mipi_csi_clk_id[CSI2_NUM_CLKS] = {
>  
>  struct csi_state {
>  	struct device *dev;
> +	const struct imx8mq_plat_data *pdata;
>  	void __iomem *regs;
>  	struct clk_bulk_data clks[CSI2_NUM_CLKS];
>  	struct reset_control *rst;
> @@ -137,6 +140,35 @@ struct csi2_pix_format {
>  	u8 width;
>  };
>  
> +/* -----------------------------------------------------------------------------
> + * i.MX8MQ GPR
> + */
> +
> +#define	GPR_CSI2_1_RX_ENABLE		BIT(13)
> +#define	GPR_CSI2_1_VID_INTFC_ENB	BIT(12)
> +#define	GPR_CSI2_1_HSEL			BIT(10)
> +#define	GPR_CSI2_1_CONT_CLK_MODE	BIT(8)
> +#define	GPR_CSI2_1_S_PRG_RXHS_SETTLE(x)	(((x) & 0x3f) << 2)
> +
> +static int imx8mq_gpr_enable(struct csi_state *state, u32 hs_settle)
> +{
> +	regmap_update_bits(state->phy_gpr,
> +			   state->phy_gpr_reg,
> +			   0x3fff,
> +			   GPR_CSI2_1_RX_ENABLE |
> +			   GPR_CSI2_1_VID_INTFC_ENB |
> +			   GPR_CSI2_1_HSEL |
> +			   GPR_CSI2_1_CONT_CLK_MODE |
> +			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(hs_settle));
> +
> +	return 0;
> +}
> +
> +static const struct imx8mq_plat_data imx8mq_data = {
> +	.name = "i.MX8MQ",
> +	.enable = imx8mq_gpr_enable,
> +};
> +
>  static const struct csi2_pix_format imx8mq_mipi_csi_formats[] = {
>  	/* RAW (Bayer and greyscale) formats. */
>  	{
> @@ -364,14 +396,9 @@ static int imx8mq_mipi_csi_start_stream(struct csi_state *state,
>  	if (ret)
>  		return ret;
>  
> -	regmap_update_bits(state->phy_gpr,
> -			   state->phy_gpr_reg,
> -			   0x3fff,
> -			   GPR_CSI2_1_RX_ENABLE |
> -			   GPR_CSI2_1_VID_INTFC_ENB |
> -			   GPR_CSI2_1_HSEL |
> -			   GPR_CSI2_1_CONT_CLK_MODE |
> -			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(hs_settle));
> +	ret = state->pdata->enable(state, hs_settle);
> +	if (ret)
> +		return ret;
>  
>  	return 0;
>  }
> @@ -379,6 +406,9 @@ static int imx8mq_mipi_csi_start_stream(struct csi_state *state,
>  static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
>  {
>  	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
> +
> +	if (state->pdata->disable)
> +		state->pdata->disable(state);
>  }
>  
>  /* -----------------------------------------------------------------------------
> @@ -869,6 +899,8 @@ static int imx8mq_mipi_csi_probe(struct platform_device *pdev)
>  
>  	state->dev = dev;
>  
> +	state->pdata = of_device_get_match_data(dev);
> +
>  	ret = imx8mq_mipi_csi_parse_dt(state);
>  	if (ret < 0) {
>  		dev_err(dev, "Failed to parse device tree: %d\n", ret);
> @@ -946,7 +978,7 @@ static void imx8mq_mipi_csi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id imx8mq_mipi_csi_of_match[] = {
> -	{ .compatible = "fsl,imx8mq-mipi-csi2", },
> +	{ .compatible = "fsl,imx8mq-mipi-csi2", .data = &imx8mq_data },
>  	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, imx8mq_mipi_csi_of_match);

-- 
Regards,

Laurent Pinchart



More information about the linux-arm-kernel mailing list