[PATCH v3 03/12] media: dt-bindings: Add binding doc for i.MX8QXP and i.MX8QM ISI
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Thu Mar 27 11:44:25 PDT 2025
Hi Frank,
Thank you for the patch.
On Mon, Feb 10, 2025 at 03:59:22PM -0500, Frank Li wrote:
> Add binding documentation for i.MX8QXP and i.MX8QM ISI. The clock-names,
> power-domains, and ports differ significantly from the existing
> nxp,imx8-isi.yaml. Create a new file to avoid complex if-else branches.
Mixed feelings about having different bindings files for what is
essentially the same IP, but I won't object.
> Add new file to MAINTAINERS.
>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> change from v2 to v3
> - none
> change from v1 to v2
> - create new file for 8qm and 8qxp accroding rob's suggestion.
> ---
> .../devicetree/bindings/media/fsl,imx8qm-isi.yaml | 117 +++++++++++++++++++++
> .../devicetree/bindings/media/fsl,imx8qxp-isi.yaml | 103 ++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 221 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
> new file mode 100644
> index 0000000000000..61c551673e2a4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/fsl,imx8qm-isi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX8QM Image Sensing Interface
> +
> +maintainers:
> + - Frank Li <Frank.Li at nxp.com>
> +
> +description:
> + The Image Sensing Interface (ISI) combines image processing pipelines with
> + DMA engines to process and capture frames originating from a variety of
> + sources. The inputs to the ISI go through Pixel Link interfaces, and their
> + number and nature is SoC-dependent. They cover both capture interfaces (MIPI
> + CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx8qm-isi
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 8
> +
> + clock-names:
> + items:
> + - const: per0
> + - const: per1
> + - const: per2
> + - const: per3
> + - const: per4
> + - const: per5
> + - const: per6
> + - const: per7
> +
> + interrupts:
> + maxItems: 8
> +
> + power-domains:
> + maxItems: 8
This surprises me. The reference manual does list 8 clocks and
interrupts, but only 6 channels in the ISI section (for instance in
15.6.1.1.4). Which one is wrong ?
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port at 2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: MIPI CSI-2 RX 0
> + port at 3:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: MIPI CSI-2 RX 1
> + port at 4:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: HDMI RX
Figure 15-59 in the reference manual list MIPI CSI-2 RX 0 and RX 1 as
connected to inputs 0 and 1 respectively.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> + - power-domains
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/imx8-clock.h>
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> +
> + image-controller at 58100000 {
> + compatible = "fsl,imx8qm-isi";
> + reg = <0x58100000 0x90000>;
The memory map in the reference manual lists the "Pixel DMA" region as
ending at 0x5817ffff. Shouldn't the length of the region be 0x80000 ?
> + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
> + <&pdma1_lpcg IMX_LPCG_CLK_0>,
> + <&pdma2_lpcg IMX_LPCG_CLK_0>,
> + <&pdma3_lpcg IMX_LPCG_CLK_0>,
> + <&pdma4_lpcg IMX_LPCG_CLK_0>,
> + <&pdma5_lpcg IMX_LPCG_CLK_0>,
> + <&pdma6_lpcg IMX_LPCG_CLK_0>,
> + <&pdma7_lpcg IMX_LPCG_CLK_0>;
> + clock-names = "per0", "per1", "per2", "per3",
> + "per4", "per5", "per6", "per7";
> + power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
> + <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
> + <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
> + <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 2 {
> + reg = <2>;
> + endpoint {
> + remote-endpoint = <&mipi_csi0_out>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
> new file mode 100644
> index 0000000000000..818fea0e4679f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
> @@ -0,0 +1,103 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/fsl,imx8qxp-isi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX8QXP Image Sensing Interface
> +
> +maintainers:
> + - Frank Li <Frank.Li at nxp.com>
> +
> +description:
> + The Image Sensing Interface (ISI) combines image processing pipelines with
> + DMA engines to process and capture frames originating from a variety of
> + sources. The inputs to the ISI go through Pixel Link interfaces, and their
> + number and nature is SoC-dependent. They cover both capture interfaces (MIPI
> + CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx8qxp-isi
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 5
> +
> + clock-names:
> + items:
> + - const: per0
> + - const: per4
> + - const: per5
> + - const: per6
> + - const: per7
> +
> + interrupts:
> + maxItems: 5
> +
> + power-domains:
> + maxItems: 5
Here you have 5 channels, while the reference manual lists 8 interrupts
and 6 channels in the ISI documentation.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port at 2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: MIPI CSI-2 RX 0
> + port at 6:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: CSI-2 Parallel RX
Table 15-6 in the reference manual lists the parallel port as input 4.
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> + - power-domains
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/clock/imx8-clock.h>
> + #include <dt-bindings/clock/imx8-lpcg.h>
> + #include <dt-bindings/firmware/imx/rsrc.h>
> +
> + image-controller at 58100000 {
> + compatible = "fsl,imx8qxp-isi";
> + reg = <0x58100000 0x90000>;
Same comment here about the registers range.
> + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
> + <&pdma4_lpcg IMX_LPCG_CLK_0>,
> + <&pdma5_lpcg IMX_LPCG_CLK_0>,
> + <&pdma6_lpcg IMX_LPCG_CLK_0>,
> + <&pdma7_lpcg IMX_LPCG_CLK_0>;
> + clock-names = "per0", "per4", "per5", "per6", "per7";
> + power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH4>,
> + <&pd IMX_SC_R_ISI_CH5>, <&pd IMX_SC_R_ISI_CH6>,
> + <&pd IMX_SC_R_ISI_CH7>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 2 {
> + reg = <2>;
> + endpoint {
> + remote-endpoint = <&mipi_csi0_out>;
> + };
> + };
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 40d1b7ec30fde..f243257ef7653 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17000,6 +17000,7 @@ NXP i.MX 8M ISI DRIVER
> M: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> L: linux-media at vger.kernel.org
> S: Maintained
> +F: Documentation/devicetree/bindings/media/fsl,imx8*-isi.yaml
> F: Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
Should nxp,imx8-isi.yaml be renamed to fsl,imx8-isi.yaml ?
> F: drivers/media/platform/nxp/imx8-isi/
>
--
Regards,
Laurent Pinchart
More information about the linux-arm-kernel
mailing list