[PATCH v5 1/2] pm: runtime: Add new devm functions

[Csókás Bence]

Hi,

On 2025. 03. 27. 12:08, Rafael J. Wysocki wrote:
>>> Now, there is a reason why calling pm_runtime_set_suspended() on a
>>> device after disabling runtime PM for it is a good idea at all.
>>> Namely, disabling runtime PM alone does not release the device's
>>> suppliers or its parent, so if you want to release them after
>>> disabling runtime PM for the device, you need to do something more.
>>> I'm thinking that this is a  mistake in the design of the runtime PM
>>> core.
>>
>> Well, this is the order in which the original driver worked before
>> anyways. As a quick fix, would it work if we created a devm function
>> that would pm_runtime_set_active(), immediately followed by
>> pm_runtime_enable(), and on cleanup it would pm_runtime_set_suspended()
>> followed by pm_runtime_disable_action() (i.e.
>> pm_runtime_dont_use_autosuspend() and pm_runtime_disable())?
> 
> On cleanup you'd need to ensure that pm_runtime_disable() is followed
> by pm_runtime_set_suspended() (not the other way around).  Also
> pm_runtime_dont_use_autosuspend() needs to be called when runtime PM
> is still enabled.
> 
> With the above taken into account, it would work.

Ok, so which is the correct order then?

1. the way it is done now in [PATCH v5 2/2] (which is the same order the 
driver has been using before anyways):

     pm_runtime_use_autosuspend()
/-- devm_pm_runtime_set_active()
|   /-- devm_pm_runtime_enable()
|   |   /-- devm_pm_runtime_get_noresume()
|   |   |
|   |   \-> pm_runtime_put_noidle()
|   \-> pm_runtime_dont_use_autosuspend() &&
|       pm_runtime_disable()
\-> pm_runtime_set_suspended()

or,
2. swapped set_suspended() and runtime_disable()

     pm_runtime_use_autosuspend()
/-- devm_pm_runtime_set_active_enabled() [new fn]
|    == pm_runtime_set_active() &&
|       pm_runtime_enable()
|   /-- devm_pm_runtime_get_noresume()
|   |
|   \-> pm_runtime_put_noidle()
\--> pm_runtime_set_suspended()
      pm_runtime_dont_use_autosuspend()
      pm_runtime_disable()

Bence