[Intel-wired-lan] [PATCH iwl-next v10 13/14] igc: add support to get MAC Merge data via ethtool

[Mor Bar-Gabay]

On 18/03/2025 5:07, Faizal Rahim wrote:
> Implement "ethtool --show-mm" callback for IGC.
> 
> Tested with command:
> $ ethtool --show-mm enp1s0.
>    MAC Merge layer state for enp1s0:
>    pMAC enabled: on
>    TX enabled: on
>    TX active: on
>    TX minimum fragment size: 64
>    RX minimum fragment size: 60
>    Verify enabled: on
>    Verify time: 128
>    Max verify time: 128
>    Verification status: SUCCEEDED
> 
> Verified that the fields value are retrieved correctly.
> 
> Reviewed-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> Signed-off-by: Faizal Rahim <faizal.abdul.rahim at linux.intel.com>
> ---
>   drivers/net/ethernet/intel/igc/igc_ethtool.c | 14 ++++++++++++++
>   drivers/net/ethernet/intel/igc/igc_tsn.h     |  1 +
>   2 files changed, 15 insertions(+)
> 
Tested-by: Mor Bar-Gabay <morx.bar.gabay at intel.com>