[PATCH 2/2] dts: arm64: amlogic: add a5 pinctrl node

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao at amlogic.com>

Add pinctrl device to support Amlogic A5.

Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi | 90 +++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
index 32ed1776891b..844302db2133 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "amlogic-a4-common.dtsi"
+#include <dt-bindings/pinctrl/amlogic,pinctrl.h>
 #include <dt-bindings/power/amlogic,a5-pwrc.h>
 / {
 	cpus {
@@ -50,6 +51,95 @@ pwrc: power-controller {
 };
 
 &apb {
+	periphs_pinctrl: pinctrl at 4000 {
+		compatible = "amlogic,pinctrl-a5",
+			     "amlogic,pinctrl-a4";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x4000 0x0 0x300>;
+
+		gpioz: gpio at c0 {
+			reg = <0x0 0xc0 0x0 0x40>,
+			      <0x0 0x18 0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>;
+		};
+
+		gpiox: gpio at 100 {
+			reg = <0x0 0x100 0x0 0x40>,
+			      <0x0 0xc   0x0 0xc>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>;
+		};
+
+		gpiot: gpio at 140 {
+			reg = <0x0 0x140 0x0 0x40>,
+			      <0x0 0x2c  0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 14>;
+		};
+
+		gpiod: gpio at 180 {
+			reg = <0x0 0x180 0x0 0x40>,
+			      <0x0 0x40  0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>;
+		};
+
+		gpioe: gpio at 1c0 {
+			reg = <0x0 0x1c0 0x0 0x40>,
+			      <0x0 0x48  0x0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>;
+		};
+
+		gpioc: gpio at 200 {
+			reg = <0x0 0x200 0x0 0x40>,
+			      <0x0 0x24  0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 11>;
+		};
+
+		gpiob: gpio at 240 {
+			reg = <0x0 0x240 0x0 0x40>,
+			      <0x0 0x0   0x0 0x8>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>;
+		};
+
+		gpioh: gpio at 280 {
+			reg = <0x0 0x280 0x0 0x40>,
+			      <0x0 0x4c  0x0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 5>;
+		};
+
+		gpio_test_n: gpio at 2c0 {
+			reg = <0x0 0x2c0 0x0 0x40>,
+			      <0x0 0x3c  0x0 0x4>;
+			reg-names = "gpio", "mux";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>;
+		};
+	};
+
 	gpio_intc: interrupt-controller at 4080 {
 		compatible = "amlogic,a5-gpio-intc",
 			     "amlogic,meson-gpio-intc";

-- 
2.37.1