[PATCH 2/2] mmc: sdhci-esdhc-imx: calclute data timeout value based on clock

[Bough Chen]

> -----Original Message-----
> From: Luke Wang <ziniu.wang_1 at nxp.com>
> Sent: 2025年3月24日 17:24
> To: adrian.hunter at intel.com; ulf.hansson at linaro.org; Bough Chen
> <haibo.chen at nxp.com>
> Cc: shawnguo at kernel.org; s.hauer at pengutronix.de; kernel at pengutronix.de;
> festevam at gmail.com; imx at lists.linux.dev; linux-mmc at vger.kernel.org; dl-S32
> <S32 at nxp.com>; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org
> Subject: [PATCH 2/2] mmc: sdhci-esdhc-imx: calclute data timeout value based
> on clock
> 
> From: Luke Wang <ziniu.wang_1 at nxp.com>
> 
> Calclute data timeout value based on clock instead of using max value.
> 
> Signed-off-by: Luke Wang <ziniu.wang_1 at nxp.com>
> ---
>  drivers/mmc/host/sdhci-esdhc-imx.c | 15 +++++++++++----
>  1 file changed, 11 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c
> b/drivers/mmc/host/sdhci-esdhc-imx.c
> index ff78a7c6a04c..e7316ecff64e 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -31,6 +31,7 @@
>  #include "cqhci.h"
> 
>  #define ESDHC_SYS_CTRL_DTOCV_MASK	GENMASK(19, 16)
> +#define ESDHC_SYS_CTRL_DTOCV_SHIFT	16
>  #define ESDHC_SYS_CTRL_IPP_RST_N	BIT(23)
>  #define	ESDHC_CTRL_D3CD			0x08
>  #define ESDHC_BURST_LEN_EN_INCR		(1 << 27)
> @@ -1387,12 +1388,16 @@ static unsigned int
> esdhc_get_max_timeout_count(struct sdhci_host *host)
> 
>  static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command
> *cmd)  {
> -	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> -	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
> +	bool too_big = false;
> +	u8 count = sdhci_calc_timeout(host, cmd, &too_big);
> 
> -	/* use maximum timeout counter */
> +	/*
> +	 * ESDHC_SYSTEM_CONTROL bit[23] used to control hardware reset
> +	 * pin of the card. Write 0 to bit[23] will reset the card.
> +	 * Only write DTOCV filed here.
> +	 */
No need to mention the bit[23] here, this is a bit confuse here.
Just drop the comment here.

Then for this patch:
Reviewed-by: Haibo Chen <haibo.chen at nxp.com>

Regards
Haibo Chen
>  	esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK,
> -			esdhc_is_usdhc(imx_data) ? 0xF0000 : 0xE0000,
> +			count << ESDHC_SYS_CTRL_DTOCV_SHIFT,
>  			ESDHC_SYSTEM_CONTROL);
>  }
> 
> @@ -1777,6 +1782,8 @@ static int sdhci_esdhc_imx_probe(struct
> platform_device *pdev)
>  		 * to distinguish the card type.
>  		 */
>  		host->mmc_host_ops.init_card = usdhc_init_card;
> +
> +		host->max_timeout_count = 0xF;
>  	}
> 
>  	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
> --
> 2.34.1