[PATCH] arm64: dts: rockchip: Remove overdrive-mode OPPs from RK3588J SoC dtsi

[Dragan Simic]

Hello Quentin,

On 2025-03-23 11:19, Dragan Simic wrote:
> On 2025-03-21 10:53, Quentin Schulz wrote:
>> On 3/21/25 4:28 AM, Dragan Simic wrote:
>>> The differences in the vendor-approved CPU and GPU OPPs for the 
>>> standard
>>> Rockchip RK3588 variant [1] and the industrial Rockchip RK3588J 
>>> variant [2]
>>> come from the latter, presumably, supporting an extended temperature 
>>> range
>>> that's usually associated with industrial applications, despite the 
>>> two SoC
>>> variant datasheets specifying the same upper limit for the allowed 
>>> ambient
>>> temperature for both variants.  However, the lower temperature limit 
>>> is
>> 
>> RK3588 is rated for 0-80°C, RK3588J for -40-85°C, c.f. Recommended
>> Operating Conditions, Table 3-2, Ambient Operating Temperature.
> 
> Indeed, which is why I specifically wrote "specifying the same upper
> limit", because having a lower negative temperature limit could hardly
> put the RK3588J in danger of overheating or running hotter. :)

Oh, now I see what you actually wrote above, which I misread a bit
initially...  In fact, the upper ambient temperature limit is the
same for both RK3588J and RK3588, according to the datasheets;  it's
just that the lower temperature limit is much lower for the RK3588J,
which the patch description says.

I'm not sure where did you find the 80 vs. 85 oC difference;  please,
see a couple of screenshots from the datasheets, linked below:

- RK3588 datasheet v1.6 (v1.7 is the same): https://0x0.st/8j1a.png
- RK3588J datasheet v1.1: https://0x0.st/8j1m.png

The v2 of the patch is coming soon, with the patch description improved
according to your suggestions.