[PATCH v1 3/3] arm64: dts: qcom: x1e80100-qcp: Add power control and sideband signals for PCIe3

[Wenbin Yao (Consultant)]

On 3/21/2025 3:39 PM, Krzysztof Kozlowski wrote:
> On 20/03/2025 06:55, Wenbin Yao wrote:
>> From: Qiang Yu <quic_qianyu at quicinc.com>
>>
>> Add perst, wake and clkreq sideband signals and required regulators in
>> PCIe3 controller and PHY device tree node. Describe the voltage rails of
>> the x8 PCI slots for PCIe3 port.
>>
>> Signed-off-by: Qiang Yu <quic_qianyu at quicinc.com>
>> Signed-off-by: Wenbin Yao <quic_wenbyao at quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 119 ++++++++++++++++++++++
>>   1 file changed, 119 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
>> index 28086a2bc..9cd313802 100644
>> --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
>> +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
>> @@ -318,6 +318,48 @@ vreg_wcn_3p3: regulator-wcn-3p3 {
>>   		regulator-boot-on;
>>   	};
>>   
>> +	vreg_pcie_12v: regulator-pcie_12v {
> Don't send the downstream code.
>
> Underscore are not allowed in node names plus:
>
> Please use name for all fixed regulators which matches current format
> recommendation: 'regulator-[0-9]v[0-9]'
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46
>
> Best regards,
> Krzysztof

Will fix in the next version.

-- 
With best wishes
Wenbin