[PATCH 32/34] rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits

[André Draszik]

The regmap_clear_bits() and regmap_set_bits() helper macros state the
intention a bit more obviously.

Use those.

Signed-off-by: André Draszik <andre.draszik at linaro.org>
---
 drivers/rtc/rtc-s5m.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index e8e442c503064eb4e570af5bf7dcff6bfa7f4656..fb65a8e439d72d9070751c00f5826a403ac0b416 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -338,8 +338,8 @@ static int s5m8767_rtc_set_alarm_reg(struct s5m_rtc_info *info)
 
 	/* On S2MPS13 the AUDR is not auto-cleared */
 	if (info->device_type == S2MPS13X)
-		regmap_update_bits(info->regmap, info->regs->udr_update,
-				   S2MPS13_RTC_AUDR_MASK, 0);
+		regmap_clear_bits(info->regmap, info->regs->udr_update,
+				  S2MPS13_RTC_AUDR_MASK);
 
 	return ret;
 }
@@ -351,10 +351,8 @@ static int s5m_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	int ret;
 
 	if (info->regs->read_time_udr_mask) {
-		ret = regmap_update_bits(info->regmap,
-				info->regs->udr_update,
-				info->regs->read_time_udr_mask,
-				info->regs->read_time_udr_mask);
+		ret = regmap_set_bits(info->regmap, info->regs->udr_update,
+				      info->regs->read_time_udr_mask);
 		if (ret) {
 			dev_err(dev,
 				"Failed to prepare registers for time reading: %d\n",

-- 
2.49.0.395.g12beb8f557-goog