[PATCH] arm64: dts: amlogic: a4: fix dtb compilation warning issues

[Xianwei Zhao]

Hi Krzysztof,
     Thanks for your reply.

On 2025/3/21 17:25, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
> 
> On 21/03/2025 03:23, Xianwei Zhao via B4 Relay wrote:
>> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>
>> When use command 'make ARCH=arm64 dtbs_check W=1' to compile dtb,
>> a warning message appears.
>> "Warning (simple_bus_reg): /soc/bus at fe000000/pinctrl:
>> missing or empty reg/ranges property"
>>
>> Add the unit address to the pinctrl node to fix it.
>>
>> Fixes: ce78f679e08c ("arm64: dts: amlogic: a4: add pinctrl node")
>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi | 102 +++++++++++++++-------------
>>   1 file changed, 55 insertions(+), 47 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>> index fa80fa365f13..582e0043024b 100644
>> --- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>> @@ -51,87 +51,52 @@ pwrc: power-controller {
>>   };
>>
>>   &apb {
>> -     gpio_intc: interrupt-controller at 4080 {
>> -             compatible = "amlogic,a4-gpio-intc",
>> -                          "amlogic,meson-gpio-intc";
>> -             reg = <0x0 0x4080 0x0 0x20>;
>> -             interrupt-controller;
>> -             #interrupt-cells = <2>;
>> -             amlogic,channel-interrupts =
>> -                     <10 11 12 13 14 15 16 17 18 19 20 21>;
>> -     };
>> -
>> -     gpio_ao_intc: interrupt-controller at 8e72c {
>> -             compatible = "amlogic,a4-gpio-ao-intc",
>> -                          "amlogic,meson-gpio-intc";
>> -             reg = <0x0 0x8e72c 0x0 0x0c>;
>> -             interrupt-controller;
>> -             #interrupt-cells = <2>;
>> -             amlogic,channel-interrupts = <140 141>;
>> -     };
> 
> 
> Not related to the change you described in commit msg.
> 

I will add the corresponding description in commit msg.

> 
> Best regards,
> Krzysztof