[PATCH v7 5/5] arm64: dts: Enable DSP node for remoteproc usage

[Daniel Baluta]

Enable all relevant nodes to support remoteproc with imx8mp-evk board.
	- add rproc specific memory regions
	- enable dsp_reserved node
	- enable mu2 node
	- enable dsp node

Signed-off-by: Daniel Baluta <daniel.baluta at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index c26954e5a605..9ab3ee93a35b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -309,6 +309,16 @@ &aud2htx {
 	status = "okay";
 };
 
+&dsp_reserved {
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+			<&dsp_vdev0vring1>, <&dsp_reserved>;
+	status = "okay";
+};
+
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -690,6 +700,10 @@ dsi_out: endpoint {
 	};
 };
 
+&mu2 {
+	status = "okay";
+};
+
 &pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	clocks = <&pcie0_refclk>;
-- 
2.43.0