[net-next 3/4] dt-bindings: net: ftgmac100: add rgmii delay properties

[Andrew Lunn]

> In Aspeed desgin, the RGMII delay is a number of ps as unit to
> set delay, do not use one ps as unit. The values are different
> from each MAC. So, here describes the property values
> as index to configure corresponding scu register.
> 
> Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
> ---
>  .../bindings/net/faraday,ftgmac100.yaml          | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> index 55d6a8379025..c5904aa84e05 100644
> --- a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml
> @@ -66,6 +66,20 @@ properties:
>      type: boolean
>      deprecated: true
>  
> +  rx-internal-delay-ps:
> +    description:
> +       Setting this property to a non-zero number sets the RX internal delay
> +       for the MAC. Use this property value as a index not a ps unit to
> +       configure the corresponding delay register field. And the index range is
> +       0 to 63.

You have to use picoseconds here. As with all DT binding, you use SI
units, and the driver then converts them to whatever value you need to
poke into the register.
	
    Andrew

---
pw-bot: cr