[net-next 3/4] dt-bindings: net: ftgmac100: add rgmii delay properties

[Rob Herring (Arm)]

On Mon, 17 Mar 2025 10:59:21 +0800, Jacky Chou wrote:
> Add tx-internal-delay-ps and rx-internal-delay-ps to
> configure the RGMII delay for MAC. According to
> ethernet-controller.yaml, they use for RGMII TX and RX delay.
> 
> In Aspeed desgin, the RGMII delay is a number of ps as unit to
> set delay, do not use one ps as unit. The values are different
> from each MAC. So, here describes the property values
> as index to configure corresponding scu register.
> 
> Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
> ---
>  .../bindings/net/faraday,ftgmac100.yaml          | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml:71:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml:78:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml:119:7: [error] no new line character at the end of file (new-line-at-end-of-file)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250317025922.1526937-4-jacky_chou@aspeedtech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.