[net-next 1/4] ARM: dts: aspeed-g6:add scu to mac for RGMII delay

[Jacky Chou]

The RGMII delay of AST2600 MAC is configured in SCU
register, so add scu regmap into mac node.

Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
---
 arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 8ed715bd53aa..17e979d616dc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -236,6 +236,7 @@ mac0: ethernet at 1e660000 {
 			reg = <0x1e660000 0x180>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			scu = <&syscon>;
 			status = "disabled";
 		};
 
@@ -244,6 +245,7 @@ mac1: ethernet at 1e680000 {
 			reg = <0x1e680000 0x180>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			scu = <&syscon>;
 			status = "disabled";
 		};
 
@@ -252,6 +254,7 @@ mac2: ethernet at 1e670000 {
 			reg = <0x1e670000 0x180>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			scu = <&syscon>;
 			status = "disabled";
 		};
 
@@ -260,6 +263,7 @@ mac3: ethernet at 1e690000 {
 			reg = <0x1e690000 0x180>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			scu = <&syscon>;
 			status = "disabled";
 		};
 
-- 
2.34.1