[PATCH v4 2/3] arm64: dts: amlogic: Add A4 Reset Controller

[Kelvin Zhang]

On 2025/3/14 16:01, Krzysztof Kozlowski wrote:
> 
> On Thu, Mar 13, 2025 at 05:05:35PM +0800, Kelvin Zhang wrote:
>>   &apb {
>> +     reset: reset-controller at 2000 {
>> +             compatible = "amlogic,a4-reset",
>> +                          "amlogic,meson-s4-reset";
>> +             reg = <0x0 0x2000 0x0 0x98>;
>> +             #reset-cells = <1>;
>> +     };
>> +
> 
> Why do you have on the bus devices with bus addressing and without it?
> What sort of bus is it?

Are you referring to the 'apb'?
If so, the 'apb' bus is defined in 
arch/arm64/boot/dts/amlogic/amlogic-a4-common.dtsi.

apb: bus at fe000000 {
         compatible = "simple-bus";
         reg = <0x0 0xfe000000 0x0 0x480000>;
         #address-cells = <2>;
         #size-cells = <2>;
         ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;

> 
>>        periphs_pinctrl: pinctrl {
>>                compatible = "amlogic,pinctrl-a4";
>>                #address-cells = <2>;
> 
> Best regards,
> Krzysztof
> 

-- 
Best regards,

Kelvin Zhang