[net-next PATCH v13 05/14] dt-bindings: mfd: Document support for Airoha AN8855 Switch SoC

[Rob Herring (Arm)]

On Sat, 15 Mar 2025 16:43:45 +0100, Christian Marangi wrote:
> Document support for Airoha AN8855 Switch SoC. This SoC expose various
> peripherals like an Ethernet Switch, a NVMEM provider and Ethernet PHYs.
> 
> It does also support i2c and timers but those are not currently
> supported/used.
> 
> Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
> ---
>  .../bindings/mfd/airoha,an8855.yaml           | 182 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 183 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/airoha,an8855.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/airoha,an8855.example.dtb: phy at 1: $nodename:0: 'phy at 1' does not match '^ethernet-phy(@[a-f0-9]+)?$'
	from schema $id: http://devicetree.org/schemas/net/airoha,an8855-phy.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/airoha,an8855.example.dtb: phy at 1: Unevaluated properties are not allowed ('compatible' was unexpected)
	from schema $id: http://devicetree.org/schemas/net/airoha,an8855-phy.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/airoha,an8855.example.dtb: phy at 2: $nodename:0: 'phy at 2' does not match '^ethernet-phy(@[a-f0-9]+)?$'
	from schema $id: http://devicetree.org/schemas/net/airoha,an8855-phy.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/airoha,an8855.example.dtb: phy at 2: Unevaluated properties are not allowed ('compatible' was unexpected)
	from schema $id: http://devicetree.org/schemas/net/airoha,an8855-phy.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250315154407.26304-6-ansuelsmth@gmail.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.