[net-next PATCH v12 09/13] mfd: an8855: Add support for Airoha AN8855 Switch MFD

[Andrew Lunn]

> +static int an8855_mii_set_page(struct an8855_mfd_priv *priv, u8 phy_id,

phy_id is a bit of an odd name. __mdiobus_write() expects addr, since
at this level, it is just a device on a bus. We have no idea if it is
a PHY, or an Ethernet switch, or anything else.

> +			       u8 page) __must_hold(&priv->bus->mdio_lock)
> +{
> +	struct mii_bus *bus = priv->bus;
> +	int ret;
> +
> +	ret = __mdiobus_write(bus, phy_id, AN8855_PHY_SELECT_PAGE, page);
> +	if (ret < 0)
> +		dev_err_ratelimited(&bus->dev,
> +				    "failed to set an8855 mii page\n");
> +
> +	/* Cache current page if next mii read/write is for switch */
> +	priv->current_page = page;
> +	return ret < 0 ? ret : 0;

__mdiobus_write() should only return -ve error code, or 0. So you
don't need this.

	Andrew