[PATCH] dmaengine: xilinx_dma: Set max segment size

[Folker Schwesinger]

On Fri Mar 14, 2025 at 2:47 PM CET, Thomas Gessler wrote:
> Set the maximumg DMA segment size from the actual core configuration
> value. Without this setting, the default value of 64 KiB is reported,
> and larger sizes cannot be used for IIO DMAEngine buffers.
>
> Signed-off-by: Thomas Gessler <thomas.gessler at brueckmann-gmbh.de>

Tested-by: Folker Schwesinger <dev at folker-schwesinger.de>

> ---
>  drivers/dma/xilinx/xilinx_dma.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index 108a7287f4cd..4b4a299e3807 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -3114,6 +3114,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> +	dma_set_max_seg_size(xdev->dev, xdev->max_buffer_len);
> +
>  	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
>  		xdev->has_axistream_connected =
>  			of_property_read_bool(node, "xlnx,axistream-connected");