[PATCH] ARM: dts: imx31/imx6: Use flash as the NOR node name

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

According to mtd-physmap.yaml, 'nor' is not a valid node name.

Change it to 'flash' to fix the following dt-schema warning:

nor at 0,0: $nodename:0: 'nor at 0,0' does not match '^(flash|.*sram|nand)(@.*)?$'

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/boot/dts/nxp/imx/imx31-lite.dts         | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts      | 2 +-
 arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
index d17abdfb6330..630f8fa69ba8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx31-lite.dts
@@ -157,7 +157,7 @@ &uart3 {
 &weim {
 	status = "okay";
 
-	nor at 0,0 {
+	flash at 0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0x0 0x200000>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index f08b37010291..bba82126aaaa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -279,7 +279,7 @@ &weim {
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "okay";
 
-	nor at 0,0 {
+	flash at 0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index a381cb224c1e..2587d17c5918 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -854,7 +854,7 @@ &weim {
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
-	nor at 0,0 {
+	flash at 0,0 {
 		compatible = "cfi-flash";
 		reg = <0 0 0x02000000>;
 		#address-cells = <1>;
-- 
2.34.1