[PATCH net-next v3 6/7] net: ethtool: plca: Use per-PHY DUMP operations

[Maxime Chevallier]

Leverage the per-phy ethnl DUMP helpers in case we have more that one
PLCA-able PHY on the link.

This is done for both PLCA status and PLCA config.

Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
---
 net/ethtool/plca.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index e1f7820a6158..2148ff607561 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -191,6 +191,12 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
 
 	.set			= ethnl_set_plca,
 	.set_ntf_cmd		= ETHTOOL_MSG_PLCA_NTF,
+
+	.dump_start		= ethnl_dump_start_perphy,
+	.dump_one_dev		= ethnl_dump_one_dev_perphy,
+	.dump_done		= ethnl_dump_done_perphy,
+
+	.allow_pernetdev_dump	= true,
 };
 
 // PLCA get status message -------------------------------------------------- //
@@ -268,4 +274,10 @@ const struct ethnl_request_ops ethnl_plca_status_request_ops = {
 	.prepare_data		= plca_get_status_prepare_data,
 	.reply_size		= plca_get_status_reply_size,
 	.fill_reply		= plca_get_status_fill_reply,
+
+	.dump_start		= ethnl_dump_start_perphy,
+	.dump_one_dev		= ethnl_dump_one_dev_perphy,
+	.dump_done		= ethnl_dump_done_perphy,
+
+	.allow_pernetdev_dump	= true,
 };
-- 
2.48.1