[PATCH 2/2] ARM: dts: bananapi: add support for PHY LEDs

[Michael Klein]

Hi,

On Thu, Mar 13, 2025 at 07:07:24AM +0100, Jernej Škrabec wrote:
>Dne sreda, 12. marec 2025 ob 20:36:28 Srednjeevropski standardni čas je Michael Klein napisal(a):
>> The Bananapi M1 has three LEDs connected to the RTL8211E ethernet PHY.
>> Add the corresponding nodes to the device tree.
>>
>> Signed-off-by: Michael Klein <michael at fossekall.de>
>
>This is patch 2/2. Which one is patch 1/2? I got only one.

https://patchwork.kernel.org/project/netdevbpf/patch/20250312193629.85417-1-michael@fossekall.de/

Sorry for any inconvenience in case I messed up the patch submission.

I made two commits for this change and submitted them via `git send-email 
HEAD^^`. The first patch went to netdev at vger.kernel.org, the second 
to linux-arm-kernel at lists.infradead.org, which seems logical. Have I 
done something wrong?

>Best regards,
>Jernej

Michael

>
>> ---
>>  .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
>>  1 file changed, 27 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> index 46ecf9db2324..4976453ed192 100644
>> --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> @@ -48,6 +48,7 @@
>>
>>  #include <dt-bindings/gpio/gpio.h>
>>  #include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/leds/common.h>
>>
>>  / {
>>  	model = "LeMaker Banana Pi";
>> @@ -169,6 +170,32 @@ &ir0 {
>>  &gmac_mdio {
>>  	phy1: ethernet-phy at 1 {
>>  		reg = <1>;
>> +
>> +		leds {
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +
>> +			led at 0 {
>> +				reg = <0>;
>> +				color = <LED_COLOR_ID_GREEN>;
>> +				default-state = "keep";
>> +				linux,default-trigger = "netdev";
>> +			};
>> +
>> +			led at 1 {
>> +				reg = <1>;
>> +				color = <LED_COLOR_ID_AMBER>;
>> +				default-state = "keep";
>> +				linux,default-trigger = "netdev";
>> +			};
>> +
>> +			led at 2 {
>> +				reg = <2>;
>> +				color = <LED_COLOR_ID_BLUE>;
>> +				default-state = "keep";
>> +				linux,default-trigger = "netdev";
>> +			};
>> +		};
>>  	};
>>  };
>>
>>
>
>
>
>
>

--