[PATCH v2 7/7] arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX

[Andy Yan]

Hi Dmitry,

At 2025-03-12 20:39:17, "Dmitry Baryshkov" <lumag at kernel.org> wrote:
>On Wed, Mar 12, 2025 at 06:42:08PM +0800, Andy Yan wrote:
>> From: Andy Yan <andy.yan at rock-chips.com>
>> 
>> The HDMI Port next to Headphone Jack is drived by
>> DP1 on rk3588 via a dp2hdmi converter.
>> 
>> Add related dt nodes to enable it.
>> 
>> Note: ROCKCHIP_VOP2_EP_DP1 is defined as 11 in dt-binding header,
>> but it will trigger a dtc warning like "graph node unit address
>> error, expected "b"" if we use it directly after endpoint, so we
>> use "b" instead here.
>> 
>> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
>> ---
>> 
>> (no changes since v1)
>> 
>>  .../boot/dts/rockchip/rk3588-rock-5-itx.dts   | 37 +++++++++++++++++++
>>  1 file changed, 37 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
>> index 67b886329248..29f10ec9f0c1 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
>> @@ -57,6 +57,18 @@ analog-sound {
>>  			  "Headphone", "Headphones";
>>  	};
>>  
>> +	dp-con {
>> +		compatible = "dp-connector";
>
>You've written that it is an HDMI connector. Could you possibly clarify,
>why is it being registered as a DP connector? Is there any kind of
>a bridge between the DP controller and the HDMI connector?

When I was preparing this patch at that time, I also had some doubts. 
Whether it should be registered as a DP connector or an HDMI connector. 
There is a DP2HDMI conversion chip between the DP of RK3588 and this hdmi 
interface, but this conversion chip does not require a software driver. 
If the current writing is incorrect, I will change it to hdmi-connector in the next version.

Thanks
>
>> +		label = "DP OUT";
>> +		type = "full-size";
>> +
>> +		port {
>> +			dp_con_in: endpoint {
>> +				remote-endpoint = <&dp1_out_con>;
>> +			};
>> +		};
>> +	};
>> +
>>  	gpio-leds {
>>  		compatible = "gpio-leds";
>>  		pinctrl-names = "default";
>> @@ -268,6 +280,24 @@ &cpu_l3 {
>>  	cpu-supply = <&vdd_cpu_lit_s0>;
>>  };
>>  
>> +&dp1 {
>> +	status = "okay";
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&dp1m0_pins>;
>> +};
>> +
>> +&dp1_in {
>> +	dp1_in_vp2: endpoint {
>> +		remote-endpoint = <&vp2_out_dp1>;
>> +	};
>> +};
>> +
>> +&dp1_out {
>> +	dp1_out_con: endpoint {
>> +		remote-endpoint = <&dp_con_in>;
>> +	};
>> +};
>> +
>>  &gpu {
>>  	mali-supply = <&vdd_gpu_s0>;
>>  	status = "okay";
>> @@ -1262,3 +1292,10 @@ vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
>>  		remote-endpoint = <&hdmi1_in_vp1>;
>>  	};
>>  };
>> +
>> +&vp2 {
>> +	vp2_out_dp1: endpoint at b {
>> +		reg = <ROCKCHIP_VOP2_EP_DP1>;
>> +		remote-endpoint = <&dp1_in_vp2>;
>> +	};
>> +};
>> -- 
>> 2.34.1
>> 
>
>-- 
>With best wishes
>Dmitry