[PATCH 2/2] ARM: dts: bananapi: add support for PHY LEDs

[Michael Klein]

The Bananapi M1 has three LEDs connected to the RTL8211E ethernet PHY.
Add the corresponding nodes to the device tree.

Signed-off-by: Michael Klein <michael at fossekall.de>
---
 .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index 46ecf9db2324..4976453ed192 100644
--- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -169,6 +170,32 @@ &ir0 {
 &gmac_mdio {
 	phy1: ethernet-phy at 1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led at 0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				default-state = "keep";
+				linux,default-trigger = "netdev";
+			};
+
+			led at 1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				default-state = "keep";
+				linux,default-trigger = "netdev";
+			};
+
+			led at 2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				default-state = "keep";
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
-- 
2.39.5