[PATCH v2 7/7] arm64: dts: rockchip: Enable DP2HDMI for ROCK 5 ITX

[Andy Yan]

From: Andy Yan <andy.yan at rock-chips.com>

The HDMI Port next to Headphone Jack is drived by
DP1 on rk3588 via a dp2hdmi converter.

Add related dt nodes to enable it.

Note: ROCKCHIP_VOP2_EP_DP1 is defined as 11 in dt-binding header,
but it will trigger a dtc warning like "graph node unit address
error, expected "b"" if we use it directly after endpoint, so we
use "b" instead here.

Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
---

(no changes since v1)

 .../boot/dts/rockchip/rk3588-rock-5-itx.dts   | 37 +++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index 67b886329248..29f10ec9f0c1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -57,6 +57,18 @@ analog-sound {
 			  "Headphone", "Headphones";
 	};
 
+	dp-con {
+		compatible = "dp-connector";
+		label = "DP OUT";
+		type = "full-size";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&dp1_out_con>;
+			};
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -268,6 +280,24 @@ &cpu_l3 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&dp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp1m0_pins>;
+};
+
+&dp1_in {
+	dp1_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp1>;
+	};
+};
+
+&dp1_out {
+	dp1_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	status = "okay";
@@ -1262,3 +1292,10 @@ vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
 		remote-endpoint = <&hdmi1_in_vp1>;
 	};
 };
+
+&vp2 {
+	vp2_out_dp1: endpoint at b {
+		reg = <ROCKCHIP_VOP2_EP_DP1>;
+		remote-endpoint = <&dp1_in_vp2>;
+	};
+};
-- 
2.34.1