[PATCH net-next v2 3/7] net: stmmac: stm32: use PHY capability for TX clock stop

[Russell King (Oracle)]

Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.

Add the flag to allow the stmmac core to use the PHY capability.

Cc: Christophe Roullier <christophe.roullier at st.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 1fcb74e9e3ff..c3d321192581 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -538,6 +538,7 @@ static int stm32_dwmac_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	plat_dat->flags |= STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP;
 	plat_dat->bsp_priv = dwmac;
 
 	ret = stm32_dwmac_init(plat_dat, false);
-- 
2.30.2