[PATCH net-next 7/7] net: ti: cpsw: Add metadata support for xdp mode

[Lorenzo Bianconi]

Set metadata size building the skb from xdp_buff in cpsw/cpsw_new
drivers

Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c     | 6 +++++-
 drivers/net/ethernet/ti/cpsw_new.c | 6 +++++-
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 0cb6fa6e5b7d4fb9703633f0d67a7e95e6e7d8aa..a984b7d84e5e5917b83547c862924ccd30d83601 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -351,6 +351,7 @@ static void cpsw_rx_handler(void *token, int len, int status)
 	int			ret = 0, port, ch = xmeta->ch;
 	int			headroom = CPSW_HEADROOM_NA;
 	struct net_device	*ndev = xmeta->ndev;
+	u32			metasize = 0;
 	struct cpsw_priv	*priv;
 	struct page_pool	*pool;
 	struct sk_buff		*skb;
@@ -400,7 +401,7 @@ static void cpsw_rx_handler(void *token, int len, int status)
 			size -= CPSW_RX_VLAN_ENCAP_HDR_SIZE;
 		}
 
-		xdp_prepare_buff(&xdp, pa, headroom, size, false);
+		xdp_prepare_buff(&xdp, pa, headroom, size, true);
 
 		port = priv->emac_port + cpsw->data.dual_emac;
 		ret = cpsw_run_xdp(priv, ch, &xdp, page, port, &len);
@@ -408,6 +409,7 @@ static void cpsw_rx_handler(void *token, int len, int status)
 			goto requeue;
 
 		headroom = xdp.data - xdp.data_hard_start;
+		metasize = xdp.data - xdp.data_meta;
 
 		/* XDP prog can modify vlan tag, so can't use encap header */
 		status &= ~CPDMA_RX_VLAN_ENCAP;
@@ -423,6 +425,8 @@ static void cpsw_rx_handler(void *token, int len, int status)
 
 	skb_reserve(skb, headroom);
 	skb_put(skb, len);
+	if (metasize)
+		skb_metadata_set(skb, metasize);
 	skb->dev = ndev;
 	if (status & CPDMA_RX_VLAN_ENCAP)
 		cpsw_rx_vlan_encap(skb);
diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c
index 3da1c131335df1ff79b32ce0e3ea5200a2e53f4b..5b5b52e4e7a757a14965fe6df41935aed547111f 100644
--- a/drivers/net/ethernet/ti/cpsw_new.c
+++ b/drivers/net/ethernet/ti/cpsw_new.c
@@ -293,6 +293,7 @@ static void cpsw_rx_handler(void *token, int len, int status)
 	struct page_pool *pool;
 	struct sk_buff *skb;
 	struct xdp_buff xdp;
+	u32 metasize = 0;
 	int ret = 0;
 	dma_addr_t dma;
 
@@ -345,13 +346,14 @@ static void cpsw_rx_handler(void *token, int len, int status)
 			size -= CPSW_RX_VLAN_ENCAP_HDR_SIZE;
 		}
 
-		xdp_prepare_buff(&xdp, pa, headroom, size, false);
+		xdp_prepare_buff(&xdp, pa, headroom, size, true);
 
 		ret = cpsw_run_xdp(priv, ch, &xdp, page, priv->emac_port, &len);
 		if (ret != CPSW_XDP_PASS)
 			goto requeue;
 
 		headroom = xdp.data - xdp.data_hard_start;
+		metasize = xdp.data - xdp.data_meta;
 
 		/* XDP prog can modify vlan tag, so can't use encap header */
 		status &= ~CPDMA_RX_VLAN_ENCAP;
@@ -368,6 +370,8 @@ static void cpsw_rx_handler(void *token, int len, int status)
 	skb->offload_fwd_mark = priv->offload_fwd_mark;
 	skb_reserve(skb, headroom);
 	skb_put(skb, len);
+	if (metasize)
+		skb_metadata_set(skb, metasize);
 	skb->dev = ndev;
 	if (status & CPDMA_RX_VLAN_ENCAP)
 		cpsw_rx_vlan_encap(skb);

-- 
2.48.1