[PATCH 1/4] firmware: arm_scmi: bus: Bypass setting fwnode for scmi cpufreq

[Sudeep Holla]

On Tue, Mar 11, 2025 at 11:12:45AM +0000, Peng Fan wrote:
> Based on linux-next, I added below node:
>
> +
> +               test at 4f000000 {
> +                       compatible = "fsl,imx-test";
> +                       power-domains = <&scmi_devpd IMX95_PD_VPU>, <&scmi_perf IMX95_PERF_VPU>;
> +                       power-domain-names = "vpumix", "vpuperf";
> +               };
>
> I not write a driver for it, so just check devlink information from sysfs interface.
>
> From below sys directory, this test device takes scmi_dev.4 and scmi_dev.3 as supplier.
> root at imx95evk:/sys/bus/platform/devices/soc:test at 4f000000# ls
> driver_override  of_node  subsystem                          supplier:scmi_protocol:scmi_dev.4  waiting_for_supplier
> modalias         power    supplier:scmi_protocol:scmi_dev.3  uevent
>
> Checking scmi_dev.4 below, it is scmi cpufreq, not the scmi perf device.
> scmi_dev.3 is correct, it is genpd.
>
> root at imx95evk:/sys/bus/platform/devices/soc:test at 4f000000# cat /sys/bus/scmi_protocol/devices/scmi_dev.4/modalias
> scmi_dev.4:13:cpufreq
> root at imx95evk:/sys/bus/platform/devices/soc:test at 4f000000# cat /sys/bus/scmi_protocol/devices/scmi_dev.3/modalias
> scmi_dev.3:11:genpd
> root at imx95evk:/sys/bus/platform/devices/soc:test at 4f000000#
>
>
> So it is clear that wrong fw_devlink is created, it is because scmi cpufreq device is
> created earlier and when device_add, the below logic makes the fwnode pointer points
> to scmi cpufreq device.
>         if (dev->fwnode && !dev->fwnode->dev) {
>                 dev->fwnode->dev = dev;
>                 fw_devlink_link_device(dev);
>         }
>

Thanks, looks like simple way to reproduce the issue. I will give it a try.

--
Regards,
Sudeep