[PATCH net-next 7/9] net: stmmac: sti: remove of_get_phy_mode()

[Russell King (Oracle)]

devm_stmmac_probe_config_dt() already gets the PHY mode from firmware,
which is stored in plat_dat->phy_interface. Therefore, we don't need to
get it in platform code.

Pass plat_dat into sti_dwmac_parse_data(), and set dwmac->interface
from plat_dat->phy_interface.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
index 13b9c2a51fce..be57c6c12c1c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -185,7 +185,8 @@ static int sti_dwmac_set_mode(struct sti_dwmac *dwmac)
 }
 
 static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
-				struct platform_device *pdev)
+				struct platform_device *pdev,
+				struct plat_stmmacenet_data *plat_dat)
 {
 	struct resource *res;
 	struct device *dev = &pdev->dev;
@@ -204,12 +205,7 @@ static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	err = of_get_phy_mode(np, &dwmac->interface);
-	if (err && err != -ENODEV) {
-		dev_err(dev, "Can't get phy-mode\n");
-		return err;
-	}
-
+	dwmac->interface = plat_dat->phy_interface;
 	dwmac->regmap = regmap;
 	dwmac->gmac_en = of_property_read_bool(np, "st,gmac_en");
 	dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk");
@@ -268,7 +264,7 @@ static int sti_dwmac_probe(struct platform_device *pdev)
 	if (!dwmac)
 		return -ENOMEM;
 
-	ret = sti_dwmac_parse_data(dwmac, pdev);
+	ret = sti_dwmac_parse_data(dwmac, pdev, plat_dat);
 	if (ret) {
 		dev_err(&pdev->dev, "Unable to parse OF data\n");
 		return ret;
-- 
2.30.2