[PATCH v2] ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2

[Alexandre TORGUE]

Hi Dario

On 3/10/25 13:23, Dario Binacchi wrote:
> Replace the number 2 with the appropriate numerical constant defined in
> dt-bindings/interrupt-controller/irq.h.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> Reviewed-by: Antonio Borneo <antonio.borneo at foss.st.com>
> 
> ---
> 
> Changes in v2:
> - Drop inclusion of dt-bindings/interrupt-controller/irq.h header
> - Add Reviewed-by tag of Antonio Borneo
> 
>   arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> index 5f9c0160a9c4..324f7bb988d1 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> @@ -67,7 +67,7 @@ &i2c1 {
>   	touchscreen at 38 {
>   		compatible = "focaltech,ft6236";
>   		reg = <0x38>;
> -		interrupts = <2 2>;
> +		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
>   		interrupt-parent = <&gpiof>;
>   		touchscreen-size-x = <480>;
>   		touchscreen-size-y = <800>;

Applied on stm32-next.

Thanks
Alex