[PATCH] ARM: dts: stm32: use IRQ_TYPE_EDGE_FALLING on stm32mp157c-dk2

[Alexandre TORGUE]

Hi Dario

On 3/1/25 12:51, Dario Binacchi wrote:
> Replace the number 2 with the appropriate numerical constant defined in
> dt-bindings/interrupt-controller/irq.h.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> 
> ---
> 
>   arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> index 5f9c0160a9c4..dcf17c493022 100644
> --- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
> @@ -11,6 +11,7 @@
>   #include "stm32mp15-pinctrl.dtsi"
>   #include "stm32mp15xxac-pinctrl.dtsi"
>   #include "stm32mp15xx-dkx.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>

really needed ? as it comes also with 
dt-bindings/interrupt-controller/arm-gic.h

>   / {
>   	model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
> @@ -67,7 +68,7 @@ &i2c1 {
>   	touchscreen at 38 {
>   		compatible = "focaltech,ft6236";
>   		reg = <0x38>;
> -		interrupts = <2 2>;
> +		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
>   		interrupt-parent = <&gpiof>;
>   		touchscreen-size-x = <480>;
>   		touchscreen-size-y = <800>;