[PATCH v5 03/11] media: dt-bindings: media: add bindings for rockchip rk3568 vicap

[Krzysztof Kozlowski]

On Thu, Mar 06, 2025 at 05:56:04PM +0100, Michael Riesch wrote:
> Add documentation for the Rockchip RK3568 Video Capture (VICAP) unit.
> 
> Signed-off-by: Michael Riesch <michael.riesch at wolfvision.net>

subject: only one media prefix, the first

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

> ---
>  .../bindings/media/rockchip,rk3568-vicap.yaml      | 169 +++++++++++++++++++++
>  MAINTAINERS                                        |   1 +
>  2 files changed, 170 insertions(+)
> 

...

> +  clocks:
> +    items:
> +      - description: ACLK
> +      - description: HCLK
> +      - description: DCLK
> +      - description: ICLK
> +
> +  clock-names:
> +    items:
> +      - const: aclk
> +      - const: hclk
> +      - const: dclk
> +      - const: iclk
> +
> +  rockchip,cif-clk-delaynum:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 127
> +    description:
> +      Delay the DVP path clock input to align the sampling phase, only valid
> +      in dual edge sampling mode. Delay is zero by default and can be adjusted
> +      optionally.

default: 0

> +
> +  iommus:
> +    maxItems: 1
> +
> +  resets:
> +    items:
> +      - description: ARST
> +      - description: HRST
> +      - description: DRST
> +      - description: PRST
> +      - description: IRST
> +
> +  reset-names:
> +    items:
> +      - const: arst
> +      - const: hrst
> +      - const: drst
> +      - const: prst
> +      - const: irst
> +
> +  rockchip,grf:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle to general register file used for video input block control.
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: The digital video port (DVP, a parallel video interface).
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              bus-type:
> +                enum: [5, 6]
> +
> +            required:
> +              - bus-type
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Internal port connected to a MIPI CSI-2 host.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false

Hm, does it actually work? graph/port does not allow any other
properties. You should use graph/port-base and probably still narrow
lanes for both of port at 0 and port at 1.


> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/rk3568-cru.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/power/rk3568-power.h>
> +    #include <dt-bindings/media/video-interfaces.h>
> +
> +    parent {

soc {

> +        #address-cells = <2>;
> +        #size-cells = <2>;

Best regards,
Krzysztof