[PATCH] ARM64: dts: imx8mp-evk: add ecspi2 support

[Frank Li]

On Thu, Mar 06, 2025 at 07:55:36PM -0300, Fabio Estevam wrote:
> On Thu, Mar 6, 2025 at 7:24 PM Frank Li <Frank.Li at nxp.com> wrote:
>
> > +&ecspi2 {
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +       num-cs = <1>;
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
> > +       cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> > +       status = "okay";
> > +
> > +       spidev1: spi at 0 {
> > +               compatible = "rohm,dh2228fv";
>
> That's not a correct description of the hardware.
>
> Conor's effort was to clean up the abuses of using "rohm,dh2228fv" to
> get spidev support.
>
> Please check:
>
> fc28d1c1fe3b3 ("spi: spidev: add correct compatible for Rohm BH2228FV")

Thanks! It is actually to get spidev. From commit message, I don't know
what next steps should be did, use "rohm,bh2228fv" or other method to
support spidev?

Frank