[PATCH 1/3] net: stmmac: dwmac-rk: Use DELAY_ENABLE macro for RK3328

[Jonas Karlman]

Support for Rockchip RK3328 GMAC and addition of the DELAY_ENABLE macro
was merged in the same merge window. This resulted in RK3328 not being
converted to use the new DELAY_ENABLE macro.

Change to use the DELAY_ENABLE macro to help disable MAC delay when
RGMII_ID/RXID/TXID is used.

Fixes: eaf70ad14cbb ("net: stmmac: dwmac-rk: Add handling for RGMII_ID/RXID/TXID")
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 003fa5cf42c3..297fa93e4a39 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -593,8 +593,7 @@ static void rk3328_set_to_rgmii(struct rk_priv_data *bsp_priv,
 	regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON1,
 		     RK3328_GMAC_PHY_INTF_SEL_RGMII |
 		     RK3328_GMAC_RMII_MODE_CLR |
-		     RK3328_GMAC_RXCLK_DLY_ENABLE |
-		     RK3328_GMAC_TXCLK_DLY_ENABLE);
+		     DELAY_ENABLE(RK3328, tx_delay, rx_delay));
 
 	regmap_write(bsp_priv->grf, RK3328_GRF_MAC_CON0,
 		     RK3328_GMAC_CLK_RX_DL_CFG(rx_delay) |
-- 
2.48.1