[PATCH v2 12/15] arm64: dts: allwinner: a523: add X96Q-Pro+ support

[Jernej Škrabec]

Dne torek, 4. marec 2025 ob 23:23:06 Srednjeevropski standardni čas je Andre Przywara napisal(a):
> The X96QPro+ is a TV box using the Allwinner H728 SoC. That SoC seems to
> be a package variant of the A523 family, at least it uses the same SoC
> ID and is compatible as far as we can assess.
> 
> It comes with the following specs:
>   - Allwinner H728 SoC: 8 Arm Cortex-A55 cores, Mali-G57 MC1 GPU
>   - 2 or 4GiB DDR3L DRAM
>   - 32, 64, or 128 GiB eMMC flash
>   - AXP717 + AXP323 PMICs
>   - Gigabit Ethernet (using MAXIO PHY)
>   - HDMI port
>   - 2 * USB 2.0 ports
>   - 1 * USB 3.0 port
>   - microSD card slot
>   - TOSLINK digital audio output
>   - 3.5mm A/V port
>   - infrared sensor
>   - 7-segment display
>   - 5V barrel plug power supply
>   - power button
> 
> The PCB provides holes for soldering a UART header or cable, this is
> connected to the debug UART0. There is another set of UART pins
> available. The board also features a FEL button (accessible through the
> 3.5mm socket) and a reset button (only accessible when case is open).
> 
> This .dts just describes the basic peripherals as far as we support them
> at the moment. The PMIC rail assignments are reverse engineered as far
> as possible, by dumping them from a running Android system, and correlating
> them to other boards using the same SoC.
> 
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>

Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej