[PATCH v2 1/5] arm64: dts: ti: k3-am62x-phyboard-lyra: Add boot phase tags
Wadim Egorov
w.egorov at phytec.de
Wed Mar 5 00:55:33 PST 2025
The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.
Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, USB (DFU), Ethernet, uSD card, eMMC, and
OSPI NOR Flash.
Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
v1: http://lists.infradead.org/pipermail/linux-arm-kernel/2025-February/1006239.html
v2:
- Add bootph-all to cpsw_port1 and main_pktma
- Remove bootph-all from cpsw3g
---
arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 15 +++++++++++++++
.../arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi | 9 +++++++++
2 files changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 2ef4cbaec789..effab2f810c2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -29,6 +29,7 @@ aliases {
memory at 80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+ bootph-all;
};
reserved_memory: reserved-memory {
@@ -131,6 +132,7 @@ main_i2c0_pins_default: main-i2c0-default-pins {
AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
>;
+ bootph-all;
};
main_mdio1_pins_default: main-mdio1-default-pins {
@@ -138,6 +140,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
>;
+ bootph-all;
};
main_mmc0_pins_default: main-mmc0-default-pins {
@@ -153,6 +156,7 @@ AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
>;
+ bootph-all;
};
main_rgmii1_pins_default: main-rgmii1-default-pins {
@@ -170,6 +174,7 @@ AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
>;
+ bootph-all;
};
ospi0_pins_default: ospi0-default-pins {
@@ -186,6 +191,7 @@ AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
>;
+ bootph-all;
};
pmic_irq_pins_default: pmic-irq-default-pins {
@@ -210,6 +216,7 @@ &cpsw3g {
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy1>;
+ bootph-all;
};
&cpsw3g_mdio {
@@ -220,6 +227,7 @@ &cpsw3g_mdio {
cpsw3g_phy1: ethernet-phy at 1 {
compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
reg = <1>;
+ bootph-all;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
@@ -232,10 +240,15 @@ mbox_m4_0: mbox-m4-0 {
};
};
+&main_pktdma {
+ bootph-all;
+};
+
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
+ bootph-all;
status = "okay";
pmic at 30 {
@@ -355,6 +368,7 @@ serial_flash: flash at 0 {
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
+ bootph-all;
};
};
@@ -363,5 +377,6 @@ &sdhci0 {
pinctrl-0 = <&main_mmc0_pins_default>;
disable-wp;
non-removable;
+ bootph-all;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
index 922cad14c9f8..aab74d6019b0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
@@ -138,6 +138,7 @@ vcc_3v3_mmc: regulator-vcc-3v3-mmc {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
+ bootph-all;
};
vcc_3v3_sw: regulator-vcc-3v3-sw {
@@ -233,6 +234,7 @@ AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
>;
+ bootph-all;
};
main_rgmii2_pins_default: main-rgmii2-default-pins {
@@ -257,6 +259,7 @@ main_uart0_pins_default: main-uart0-default-pins {
AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
>;
+ bootph-all;
};
main_uart1_pins_default: main-uart1-default-pins {
@@ -266,6 +269,7 @@ AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
>;
+ bootph-pre-ram;
};
main_usb1_pins_default: main-usb1-default-pins {
@@ -430,12 +434,14 @@ &main_mcan0 {
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
+ bootph-all;
status = "okay";
};
&main_uart1 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart1_pins_default>;
+ bootph-pre-ram;
/* Main UART1 may be used by TIFS firmware */
status = "okay";
};
@@ -467,11 +473,13 @@ &sdhci1 {
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
no-1-8-v;
+ bootph-all;
status = "okay";
};
&usbss0 {
ti,vbus-divider;
+ bootph-all;
status = "okay";
};
@@ -482,6 +490,7 @@ &usbss1 {
&usb0 {
usb-role-switch;
+ bootph-all;
port {
typec_hs: endpoint {
--
2.34.1
More information about the linux-arm-kernel
mailing list