[PATCH v14 2/2] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine

[Bryan O'Donoghue]

On 04/03/2025 08:51, Jorge Ramirez wrote:
> On 04/03/25 09:40:21, Krzysztof Kozlowski wrote:
>> On 04/03/2025 09:36, Jorge Ramirez wrote:
>>> On 03/03/25 18:13:20, Krzysztof Kozlowski wrote:
>>>> On 08/02/2025 23:51, Vikram Sharma wrote:
>>>>> The Vision Mezzanine for the Qualcomm RB3 Gen 2 ships with an imx577
>>>>> camera sensor. Enable IMX577 on the vision mezzanine.
>>>>>
>>>>> An example media-ctl pipeline for the imx577 is:
>>>>>
>>>>> media-ctl --reset
>>>>> media-ctl -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
>>>>
>>>> AFAIU, camss does not support SRGGB10, but only SRGGB10P.
>>>>
>>>> Based on tests reported on IRC I think this might not have been tested
>>>> correctly.
>>>
>>> I acquired SRGGB10P (10 bit packed) frames from the camera despite the
>>> pipeline being set to SRGGB10 (16 bit) samples.
>>>
>>> so something does not add up.
>>
>> Then the commands are actually correct, just the camss or media behave
>> here a bit unexpected?
>>
> 
> setting the pipeline (CSI) as SRGGB10 (16 bit samples) as per below
> 
> media-ctl --reset
> media-ctl -v -V '"imx577 '19-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> 
> allows to capture SRGGB10P samples (frames-xxxx.bin files contain 10 bit samples for the size)
> 
>   ==> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0
> 
> 
> shouldnt the CSI need to be set to SRGGB10P instead?
> 
> 
>> Best regards,
>> Krzysztof
> 

No an internal media bus format MEDIA_BUS_FMT_THING is used

See

87889f1b7ea40d2544b49c62092e6ef2792dced7
5480b0c67f120a6c293cc5eff72fa1d6a74de504
3c1dfb5a69cf836f513a2a49113ee946a4b9d95d

Yavta is specifying a v4l2 pixel format SRGGB10P which then gets 
translated into a media bus format MEDIA_BUS_FMT_SRGGB10_1X10.

I'm not sure what the historical reasons for that are, probably good ones.

---
bod