[PATCH v14 2/2] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine

[Jorge Ramirez]

On 03/03/25 18:13:20, Krzysztof Kozlowski wrote:
> On 08/02/2025 23:51, Vikram Sharma wrote:
> > The Vision Mezzanine for the Qualcomm RB3 Gen 2 ships with an imx577
> > camera sensor. Enable IMX577 on the vision mezzanine.
> > 
> > An example media-ctl pipeline for the imx577 is:
> > 
> > media-ctl --reset
> > media-ctl -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]'
> 
> AFAIU, camss does not support SRGGB10, but only SRGGB10P.
> 
> Based on tests reported on IRC I think this might not have been tested
> correctly.

I acquired SRGGB10P (10 bit packed) frames from the camera despite the
pipeline being set to SRGGB10 (16 bit) samples.

so something does not add up.

> 
> Best regards,
> Krzysztof