[PATCH net-next v4 09/13] net: phylink: Use phy_caps_lookup for fixed-link configuration

[Maxime Chevallier]

When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.

Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().

Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
---
V4: Remove unnecessary linklmode_zero in phylink_set_fixed_link(),
follwing Russell's comment

 drivers/net/phy/phylink.c | 27 +++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 6c67d5c9b787..0b9585cb508e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -805,9 +805,10 @@ static int phylink_validate(struct phylink *pl, unsigned long *supported,
 static int phylink_parse_fixedlink(struct phylink *pl,
 				   const struct fwnode_handle *fwnode)
 {
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(match) = { 0, };
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+	const struct link_capabilities *c;
 	struct fwnode_handle *fixed_node;
-	const struct phy_setting *s;
 	struct gpio_desc *desc;
 	u32 speed;
 	int ret;
@@ -879,8 +880,10 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 	linkmode_copy(pl->link_config.advertising, pl->supported);
 	phylink_validate(pl, pl->supported, &pl->link_config);
 
-	s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
-			       pl->supported, true);
+	c = phy_caps_lookup(pl->link_config.speed, pl->link_config.duplex,
+			    pl->supported, true);
+	if (c)
+		linkmode_and(match, pl->supported, c->linkmodes);
 
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, mask);
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, mask);
@@ -889,9 +892,10 @@ static int phylink_parse_fixedlink(struct phylink *pl,
 
 	phylink_set(pl->supported, MII);
 
-	if (s) {
-		__set_bit(s->bit, pl->supported);
-		__set_bit(s->bit, pl->link_config.lp_advertising);
+	if (c) {
+		linkmode_or(pl->supported, pl->supported, match);
+		linkmode_or(pl->link_config.lp_advertising,
+			    pl->link_config.lp_advertising, match);
 	} else {
 		phylink_warn(pl, "fixed link %s duplex %dMbps not recognised\n",
 			     pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
@@ -1879,21 +1883,20 @@ static int phylink_register_sfp(struct phylink *pl,
 int phylink_set_fixed_link(struct phylink *pl,
 			   const struct phylink_link_state *state)
 {
-	const struct phy_setting *s;
+	const struct link_capabilities *c;
 	unsigned long *adv;
 
 	if (pl->cfg_link_an_mode != MLO_AN_PHY || !state ||
 	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state))
 		return -EINVAL;
 
-	s = phy_lookup_setting(state->speed, state->duplex,
-			       pl->supported, true);
-	if (!s)
+	c = phy_caps_lookup(state->speed, state->duplex,
+			    pl->supported, true);
+	if (!c)
 		return -EINVAL;
 
 	adv = pl->link_config.advertising;
-	linkmode_zero(adv);
-	linkmode_set_bit(s->bit, adv);
+	linkmode_and(adv, pl->supported, c->linkmodes);
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, adv);
 
 	pl->link_config.speed = state->speed;
-- 
2.48.1