[PATCH v3 10/21] ARM: at91: pm: add DT compatible support for sama7d65

[claudiu beznea (tuxon)]

On 2/27/25 17:51, Ryan.Wanner at microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner at microchip.com>
> 
> Add support for SAMA7D65 new compatible strings in pm.c file for wakeup source
> IDs and PMC.
> This is the first bits of PM for this new SoC. PM depends on other patches.
> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner at microchip.com>
> [nicolas.ferre at microchip.com: split patch and address only the pm.c changes]
> Signed-off-by: Nicolas Ferre <nicolas.ferre at microchip.com>
> ---
>   arch/arm/mach-at91/pm.c | 8 ++++++--
>   1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 6c3e6aa22606..39644703244d 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -222,13 +222,16 @@ static const struct of_device_id sam9x60_ws_ids[] = {
>   	{ /* sentinel */ }
>   };
>   
> -static const struct of_device_id sama7g5_ws_ids[] = {
> +static const struct of_device_id sama7_ws_ids[] = {
> +	{ .compatible = "microchip,sama7d65-rtc",	.data = &ws_info[1] },
>   	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
>   	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
>   	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
>   	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
>   	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
> +	{ .compatible = "microchip,sama7d65-sdhci",	.data = &ws_info[3] },
>   	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
> +	{ .compatible = "microchip,sama7d65-rtt",	.data = &ws_info[4] },
>   	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
>   	{ /* sentinel */ }
>   };
> @@ -1379,6 +1382,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
>   	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
>   	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
>   	{ .compatible = "microchip,sam9x7-pmc", .data = &pmc_infos[4] },
> +	{ .compatible = "microchip,sama7d65-pmc", .data = &pmc_infos[4] },

According to the chapter 42.18.3. PMC System Clock Status Register at [1] there 
is no AT91SAM926x_PMC_UDP for SAMA7D65 (which you are dropping in the next 
patch). This patch would have to reflect what the documentation say instead of 
fixing it in patch 12/21.

Thank you,
Claudiu

[1] 
https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ProductDocuments/DataSheets/SAMA7D6-Series-Data-Sheet-DS60001851.pdf

>   	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
>   	{ /* sentinel */ },
>   };
> @@ -1672,7 +1676,7 @@ void __init sama7_pm_init(void)
>   	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
>   	at91_pm_init(NULL);
>   
> -	soc_pm.ws_ids = sama7g5_ws_ids;
> +	soc_pm.ws_ids = sama7_ws_ids;
>   	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
>   
>   	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);