[PATCH NOT APPLY v2 4/4] clk: scmi: Support spread spectrum

[Peng Fan]

Hi Cristian,

On Thu, Feb 06, 2025 at 12:26:32PM +0000, Cristian Marussi wrote:
>On Wed, Feb 05, 2025 at 05:49:54PM +0800, Peng Fan (OSS) wrote:
>> From: Peng Fan <peng.fan at nxp.com>
>> 
>> Support Spread Spectrum with adding scmi_clk_set_spread_spectrum
>> 
>
>Hi,
>
>I forwarded ATG with our latest exchange on the possibility of using a
>standard OEM type instead of Vendor one if it is general enough....

Do you have any update?

Thanks,
Peng

>
>...waiting for their feedback on this before reviewing further...BUT
>just one comment down below
>
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> ---
>>  drivers/clk/clk-scmi.c        | 47 +++++++++++++++++++++++++++++++++++++++++--
>>  include/linux/scmi_protocol.h |  6 ++++++
>>  2 files changed, 51 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/clk/clk-scmi.c b/drivers/clk/clk-scmi.c
>> index 15510c2ff21c0335f5cb30677343bd4ef59c0738..56b9d0166b0170807c1a83fff391033fecee2159 100644
>> --- a/drivers/clk/clk-scmi.c
>> +++ b/drivers/clk/clk-scmi.c
>> @@ -23,6 +23,7 @@ enum scmi_clk_feats {
>>  	SCMI_CLK_RATE_CTRL_SUPPORTED,
>>  	SCMI_CLK_PARENT_CTRL_SUPPORTED,
>>  	SCMI_CLK_DUTY_CYCLE_SUPPORTED,
>> +	SCMI_CLK_SSC_SUPPORTED,
>>  	SCMI_CLK_FEATS_COUNT
>>  };
>>  
>> @@ -98,6 +99,36 @@ static int scmi_clk_set_parent(struct clk_hw *hw, u8 parent_index)
>>  	return scmi_proto_clk_ops->parent_set(clk->ph, clk->id, parent_index);
>>  }
>>  
>> +static int scmi_clk_set_spread_spectrum(struct clk_hw *hw,
>> +					struct clk_spread_spectrum *clk_ss)
>> +{
>> +	struct scmi_clk *clk = to_scmi_clk(hw);
>> +	int ret;
>> +	u32 val;
>> +
>> +	/*
>> +	 * extConfigValue[7:0]   - spread percentage (%)
>> +	 * extConfigValue[23:8]  - Modulation Frequency (KHz)
>> +	 * extConfigValue[24]    - Enable/Disable
>> +	 * extConfigValue[31:25] - Modulation method
>> +	 */
>> +	val = FIELD_PREP(SCMI_CLOCK_EXT_SS_PERCENTAGE_MASK, clk_ss->spreaddepth);
>> +	val |= FIELD_PREP(SCMI_CLOCK_EXT_SS_MOD_FREQ_MASK, clk_ss->modfreq);
>> +	val |= FIELD_PREP(SCMI_CLOCK_EXT_SS_METHOD_MASK, clk_ss->method);
>> +	if (clk_ss->enable)
>> +		val |= SCMI_CLOCK_EXT_SS_ENABLE_MASK;
>> +	ret = scmi_proto_clk_ops->config_oem_set(clk->ph, clk->id,
>> +						 SCMI_CLOCK_CFG_SSC,
>> +						 val, false);
>> +	if (ret)
>> +		dev_warn(clk->dev,
>> +			 "Failed to set spread spectrum(%u,%u,%u) for clock ID %d\n",
>> +			 clk_ss->modfreq, clk_ss->spreaddepth, clk_ss->method,
>> +			 clk->id);
>> +
>> +	return ret;
>> +}
>> +
>>  static u8 scmi_clk_get_parent(struct clk_hw *hw)
>>  {
>>  	struct scmi_clk *clk = to_scmi_clk(hw);
>> @@ -316,9 +347,17 @@ scmi_clk_ops_alloc(struct device *dev, unsigned long feats_key)
>>  		ops->set_duty_cycle = scmi_clk_set_duty_cycle;
>>  	}
>>  
>> +	if (feats_key & BIT(SCMI_CLK_SSC_SUPPORTED))
>> +		ops->set_spread_spectrum = scmi_clk_set_spread_spectrum;
>> +
>>  	return ops;
>>  }
>>  
>> +static const char * const scmi_clk_imxlist[] = {
>> +	"fsl,imx95",
>> +	NULL
>> +};
>> +
>>  /**
>>   * scmi_clk_ops_select() - Select a proper set of clock operations
>>   * @sclk: A reference to an SCMI clock descriptor
>> @@ -370,8 +409,12 @@ scmi_clk_ops_select(struct scmi_clk *sclk, bool atomic_capable,
>>  	if (!ci->parent_ctrl_forbidden)
>>  		feats_key |= BIT(SCMI_CLK_PARENT_CTRL_SUPPORTED);
>>  
>> -	if (ci->extended_config)
>> -		feats_key |= BIT(SCMI_CLK_DUTY_CYCLE_SUPPORTED);
>> +	if (ci->extended_config) {
>> +		if (of_machine_compatible_match(scmi_clk_imxlist))
>
>... please NOT this also here if we use a standard OEM type :D..if it
>won't be a vendor thing anymore, you should query with CONFIG_GET, OR we
>should think also about adding some way in the spec to query the support
>for extended configs like we do for other clock features...
>
>Thanks,
>Cristian