[PATCH 2/2] arm64: dts: fsl-ls1046a: Add missing DMA entries for I2C & LPUART

[Alexander Stein]

Only i2c0 had it's DMA channels configured. Add the missing one.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0baf256b44003..d4681c491b33a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -523,6 +523,9 @@ i2c1: i2c at 2190000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 36>,
+			       <&edma0 1 37>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -535,6 +538,9 @@ i2c2: i2c at 21a0000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 34>,
+			       <&edma0 1 35>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -547,6 +553,9 @@ i2c3: i2c at 21b0000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			scl-gpios = <&gpio3 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+			dmas = <&edma0 1 40>,
+			       <&edma0 1 41>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -633,6 +642,9 @@ lpuart0: serial at 2950000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(1)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 32>,
+			       <&edma0 1 33>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -643,6 +655,9 @@ lpuart1: serial at 2960000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 30>,
+			       <&edma0 1 31>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -653,6 +668,9 @@ lpuart2: serial at 2970000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 28>,
+			       <&edma0 1 29>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -663,6 +681,9 @@ lpuart3: serial at 2980000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 26>,
+			       <&edma0 1 27>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -673,6 +694,9 @@ lpuart4: serial at 2990000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 24>,
+			       <&edma0 1 25>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -683,6 +707,9 @@ lpuart5: serial at 29a0000 {
 			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
 					    QORIQ_CLK_PLL_DIV(2)>;
 			clock-names = "ipg";
+			dmas = <&edma0 1 22>,
+			       <&edma0 1 23>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
-- 
2.43.0