[PATCH 5/8] arm64: dts: tqmls1043a: Enable SFP interface

Alexander Stein alexander.stein at ew.tq-group.com
Mon Jun 30 23:24:53 PDT 2025


There is an SFP interface usable on TQMLS1043A. Enable all the
corresponding nodes. U-Boot will configure the connection if the RCW
is configured accordingly.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 .../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts   | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
index 03748a7f657b3..e04483fdb9089 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
@@ -41,9 +41,21 @@ &esdhc {
 	wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 };
 
+&sfp1 {
+	status = "okay";
+};
+
+&sfp1_i2c {
+	status = "okay";
+};
+
 &usb2 {
 	status = "okay";
 };
 
 #include "fsl-ls1043-post.dtsi"
 #include "tqmls104xa-mbls10xxa-fman.dtsi"
+
+&enet6 {
+	status = "okay";
+};
-- 
2.43.0




More information about the linux-arm-kernel mailing list