[PATCH 0/5] media: imx8qxp: add parallel camera support

[Frank Li]

Add parallel camera support for i.MX8 chips.

The below patch to add new format support to test ov5640 sensor
   media: nxp: isi: add support for UYVY8_2X8 and YUYV8_2X8 bus codes

The bindings and driver for parallel CSI
   dt-bindings: media: add i.MX parallel csi support
   media: nxp: add V4L2 subdev driver for parallel CSI

DTS part need depend on previous MIPI CSI patches.
  https://lore.kernel.org/imx/20250522-8qxp_camera-v5-13-d4be869fdb7e@nxp.com/

  arm64: dts: imx8: add parellel csi nodes
  arm64: dts: imx8qxp-mek: add parallel ov5640 camera support

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
Alice Yuan (3):
      media: nxp: isi: add support for UYVY8_2X8 and YUYV8_2X8 bus codes
      dt-bindings: media: add i.MX parallel csi support
      media: nxp: add V4L2 subdev driver for parallel CSI

Frank Li (2):
      arm64: dts: imx8: add parallel CSI node
      arm64: dts: imx8qxp-mek: add parallel ov5640 camera support

 .../bindings/media/fsl,imx93-parallel-csi.yaml     | 108 +++
 MAINTAINERS                                        |   2 +
 arch/arm64/boot/dts/freescale/Makefile             |   3 +
 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi     |  13 +
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts      |  37 +
 arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi  |  27 +
 .../dts/freescale/imx8x-mek-ov5640-parallel.dtso   |  43 +
 drivers/media/platform/nxp/Kconfig                 |  11 +
 drivers/media/platform/nxp/Makefile                |   1 +
 drivers/media/platform/nxp/imx-parallel-csi.c      | 952 +++++++++++++++++++++
 .../media/platform/nxp/imx8-isi/imx8-isi-pipe.c    |  10 +
 11 files changed, 1207 insertions(+)
---
base-commit: 93355cfe8aec9e47fc93fbc940f1bbeedd62e249
change-id: 20250626-imx8qxp_pcam-d851238343c3

Best regards,
---
Frank Li <Frank.Li at nxp.com>