[PATCH] ARM: tegra: Use io memcpy to write to iram

[Aaron Kling]

On Wed, May 28, 2025 at 12:45 PM Aaron Kling <webgeek1234 at gmail.com> wrote:
>
> On Thu, May 22, 2025 at 11:11 AM Aaron Kling via B4 Relay
> <devnull+webgeek1234.gmail.com at kernel.org> wrote:
> >
> > From: Aaron Kling <webgeek1234 at gmail.com>
> >
> > Kasan crashes the kernel trying to check boundaries when using the
> > normal memcpy.
> >
> > Signed-off-by: Aaron Kling <webgeek1234 at gmail.com>
> > ---
> > Change-Id: I27714f45aa6aea6a7bee048f706b14b8c7535164
> > ---
> >  arch/arm/mach-tegra/reset.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
> > index d5c805adf7a82b938bebd8941eae974cf6bcdbe3..ea706fac63587a393a17fe0f1c2ad69d6e5c14f2 100644
> > --- a/arch/arm/mach-tegra/reset.c
> > +++ b/arch/arm/mach-tegra/reset.c
> > @@ -63,7 +63,7 @@ static void __init tegra_cpu_reset_handler_enable(void)
> >         BUG_ON(is_enabled);
> >         BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
> >
> > -       memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
> > +       memcpy_toio(iram_base, (void *)__tegra_cpu_reset_handler_start,
> >                         tegra_cpu_reset_handler_size);
> >
> >         err = call_firmware_op(set_cpu_boot_addr, 0, reset_address);
> >
> > ---
> > base-commit: d608703fcdd9e9538f6c7a0fcf98bf79b1375b60
> > change-id: 20250522-mach-tegra-kasan-fabd0253f268
> >
> > Best regards,
> > --
> > Aaron Kling <webgeek1234 at gmail.com>
> >
> >
>
> Friendly reminder about this patch.

Re-reminder about this patch.

Aaron