[PATCH v2 5/6] arm64: dts: exynos7870-a2corelte: enable display panel support

[Kaustabh Chakraborty]

Enable DECON and DSI nodes, and add the compatible display panel and
appropriate panel timings for this device. Also, remove the
simple-framebuffer node in favor of the panel.

This device has a 540x960 Synaptics TD4101 display panel.

Signed-off-by: Kaustabh Chakraborty <kauschluss at disroot.org>
---
 .../arm64/boot/dts/exynos/exynos7870-a2corelte.dts | 52 ++++++++++++++++------
 1 file changed, 39 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
index eb7b48593187409ce6653b7d857b63f6946aa4f7..577c34b798438b2ed70f01b4f954dfa074e97941 100644
--- a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts
@@ -27,20 +27,7 @@ aliases {
 	};
 
 	chosen {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
 		stdout-path = &serial2;
-
-		framebuffer at 67000000 {
-			compatible = "simple-framebuffer";
-			reg = <0x0 0x67000000 (540 * 960 * 4)>;
-			width = <540>;
-			height = <960>;
-			stride = <(540 * 4)>;
-			format = "a8r8g8b8";
-		};
 	};
 
 	gpio-keys {
@@ -124,6 +111,45 @@ vibrator {
 	};
 };
 
+&decon {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,burst-clock-frequency = <836000000>;
+	samsung,esc-clock-frequency = <16000000>;
+	samsung,pll-clock-frequency = <26000000>;
+
+	status = "okay";
+
+	panel at 0 {
+		compatible = "syna,td4101-panel";
+		reg = <0>;
+
+		backlight-gpios = <&gpd3 7 GPIO_ACTIVE_LOW>;
+
+		width-mm = <62>;
+		height-mm = <110>;
+
+		panel-timing {
+			clock-frequency = <69336720>;
+
+			hactive = <540>;
+			hsync-len = <4>;
+			hfront-porch = <364>;
+			hback-porch = <40>;
+
+			vactive = <960>;
+			vsync-len = <2>;
+			vfront-porch = <244>;
+			vback-porch = <13>;
+		};
+	};
+};
+
 &gpu {
 	status = "okay";
 };

-- 
2.49.0