[PATCH] net: stmmac: Fix interrupt handling for level-triggered mode in DWC_XGMAC2

Jakub Kicinski kuba at kernel.org
Wed Jun 25 15:39:33 PDT 2025


On Wed, 25 Jun 2025 10:51:34 +0800 EricChan wrote:
> According to the Synopsys Controller IP XGMAC-10G Ethernet MAC Databook
> v3.30a (section 2.7.2), when the INTM bit in the DMA_Mode register is set
> to 2, the sbd_perch_tx_intr_o[] and sbd_perch_rx_intr_o[] signals operate
> in level-triggered mode. However, in this configuration, the DMA does not
> assert the XGMAC_NIS status bit for Rx or Tx interrupt events.
> 
> This creates a functional regression where the condition
> if (likely(intr_status & XGMAC_NIS)) in dwxgmac2_dma_interrupt() will
> never evaluate to true, preventing proper interrupt handling for
> level-triggered mode. The hardware specification explicitly states that
> "The DMA does not assert the NIS status bit for the Rx or Tx interrupt
> events" (Synopsys DWC_XGMAC2 Databook v3.30a, sec. 2.7.2).
> 
> The fix ensures correct handling of both edge and level-triggered
> interrupts while maintaining backward compatibility with existing
> configurations.

Could you please add a Fixes tag pointing to the commit in which 
the problem was introduced?

If the device you're working with is publicly available it may
also be worth mentioning what it is in the commit message.
Or at least mentioning whether you tested this on real HW,
or in simulation, or not at all.
-- 
pw-bot: cr



More information about the linux-arm-kernel mailing list