[PATCH 06/13] perf: stm32: introduce DDRPERFM driver

[Clement LE GOFFIC]

On 6/25/25 08:35, Krzysztof Kozlowski wrote:
> On 24/06/2025 12:43, Clement LE GOFFIC wrote:
>> On 6/23/25 11:45, Krzysztof Kozlowski wrote:
>> [...]
>>
>> Hi Krzysztof,
>>
>> Sorry I forgot to address comments below.
>>
>>>> +
>>>> +static const struct stm32_ddr_pmu_cfg stm32_ddr_pmu_cfg_mp1 = {
>>>> +	.regs = &stm32_ddr_pmu_regspec_mp1,
>>>> +	.attribute = stm32_ddr_pmu_attr_groups_mp1,
>>>> +	.counters_nb = MP1_CNT_NB,
>>>> +	.evt_counters_nb = MP1_CNT_NB - 1, /* Time counter is not an event counter */
>>>> +	.time_cnt_idx = MP1_TIME_CNT_IDX,
>>>> +	.get_counter = stm32_ddr_pmu_get_event_counter_mp1,
>>>> +};
>>>> +
>>>> +static const struct stm32_ddr_pmu_cfg stm32_ddr_pmu_cfg_mp2 = {
>>>> +	.regs = &stm32_ddr_pmu_regspec_mp2,
>>>> +	.attribute = stm32_ddr_pmu_attr_groups_mp2,
>>>> +	.counters_nb = MP2_CNT_NB,
>>>> +	.evt_counters_nb = MP2_CNT_NB - 1, /* Time counter is an event counter */
>>>> +	.time_cnt_idx = MP2_TIME_CNT_IDX,
>>>> +	.get_counter = stm32_ddr_pmu_get_event_counter_mp2,
>>>> +};
>>>> +
>>>> +static const struct dev_pm_ops stm32_ddr_pmu_pm_ops = {
>>>> +	SET_SYSTEM_SLEEP_PM_OPS(NULL, stm32_ddr_pmu_device_resume)
>>>> +};
>>>> +
>>>> +static const struct of_device_id stm32_ddr_pmu_of_match[] = {
>>>> +	{
>>>> +		.compatible = "st,stm32mp131-ddr-pmu",
>>>> +		.data = &stm32_ddr_pmu_cfg_mp1
>>>> +	},
>>>> +	{
>>>> +		.compatible = "st,stm32mp151-ddr-pmu",
>>>> +		.data = &stm32_ddr_pmu_cfg_mp1
>>>
>>> So devices are compatible, thus express it correctly and drop this.
>>
>> Ok so I assume this comes with your comment in the bindings and
>> basically don't get you point here.
>> Can you please be more precise ?
> 
> Express compatibility in the bindings, like 90% of SoCs are doing, so
> with proper fallback and drop this entry in the table. My comment was
> pretty precise, because this is completely standard pattern, also used
> already in stm32.
> 

Ok I remember your discussion with Alex in my V1 of pinctrl-hdp :
https://lore.kernel.org/all/1de58672-5355-4b75-99f4-c48687017d2f@kernel.org/

Does it suits you :
In the SoC DT:
MP13: compatible = "st,stm32mp131-ddr-pmu", "st,stm32mp1-ddr-pmu";
MP15: compatible = "st,stm32mp151-ddr-pmu", "st,stm32mp1-ddr-pmu";
MP25: compatible = "st,stm32mp251-ddr-pmu";

In the bindings:
properties:
   compatible:
     enum:
       - st,stm32mp1-ddr-pmu
       - st,stm32mp131-ddr-pmu
       - st,stm32mp151-ddr-pmu
       - st,stm32mp251-ddr-pmu

In the driver:
static const struct of_device_id stm32_ddr_pmu_of_match[] = {
	{
		.compatible = "st,stm32mp1-ddr-pmu",
		.data = &stm32_ddr_pmu_cfg_mp1
	},
	{
		.compatible = "st,stm32mp251-ddr-pmu",
		.data = &stm32_ddr_pmu_cfg_mp2
	},
	{ },
};

Best regards,
Clément

> Best regards,
> Krzysztof