[PATCH 2/3] arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support

[Judith Mendez]

For eMMC, High Speed DDR mode is not supported [0], so remove
mmc-ddr-1_8v flag which adds the capability.

[0] https://www.ti.com/lit/gpn/am625
Signed-off-by: Judith Mendez <jm at ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 9e0b6eee9ac7..120ba8f9dd0e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -553,7 +553,6 @@ sdhci0: mmc at fa10000 {
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		bus-width = <8>;
-		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
-- 
2.49.0